Horizontal Rebar Carrier Manufacturer

We understand that rebar gives strength in concrete construction. The amount of Horizontal Rebar Carrier used in the construction of a block wall is determined by a variety of factors. We are a reputable Horizontal rebar Carrier Manufacturer. Concrete has compressive strength, which means it can withstand downward pressure, but it has low tensile strength, which means it can’t bend. A concrete block wall may hold high weights above it, but it requires reinforcement to withstand pressure, which causes the concrete block to bend. Horizontal Rebar Carrier provides lateral support while resisting bending. Depending on the type of wall and the forces exerted to it, rebar can be put vertically or horizontally.

Horizontal rebar Carrier is placed in poured concrete footing, or base of the concrete block wall. According to the type of wall and construction to be done, the spacing of rebar will differ. Horizontal rebar Carrier is laid in the joints with mortared block sometimes as support against lateral pressure. The Horizontal rebar Carrier differs but often it is about every four course of block.

Rebar used in the Construction

Any wall’s construction’s amount of Horizontal Rebar Carriers is determined by the wall’s height, length, and intended usage. Less reinforcing is needed for a freestanding garden wall or block privacy fence than for a basement or load-bearing wall in homes and buildings. Height also affects the requirement for a Horizontal Rebar Carriers; a wall that is higher than six feet needs more rebar than one that is lower. Horizontal Rebar Carriers might not be necessary for walls that are mortared, under 4 feet tall, and very short.

For spacing of Horizontal rebar Carrier in the house wall, one bar is placed at every corner, one bar is placed on each side of door or window and bars are kept 4 feet apart between those bars. A 20-foot-long wall having one door may probably require eight sections of rebar and it depends upon placement of the door.

Description :

• Safe effortless shifting /movement from one place to another through wheels.
• Open-able doors for safety at both ends.
• Four point lifting for stability.
• Turn buckle provision to prevent deflection at the ends.
• Anti-Swing arrangement.
• Safe effortless shifting /movement from one place to another through coaster wheels.
• All side rubber cushioning to protect edges of Glass-Marble.
• Glass marble is secured with belt lashing, which is easy to tighten / loosen with one side door another side platform.
• Anti-skid chequered plate at bottom.
• Easy and safe loading / unloading with one side door other side platform.
• Load tested chain slings and lifting oblongs
• Safety Brake provision (fall arrester).
• Front collapsible door with safety guards.
• Anti-skid flooring with chequered plate.
• Easy unlocking / locking through spring loaded latch.

Features:

• Its simple design makes it easy handling, safe and efficient movements of drums on and off pallets.
• One rear wheels swivel 360 degrees.
• Standard clamping chain mechanism for grips all size steel, plastic and fibre drums.
• Durable powder coat finish.
• Structural heavy-duty steel construction.
• Drum carrier can be raised up to 150mm off the ground.It Reduces the time lost to personal injuries and help increase your facility’s productivity.
• Easy use by all operators.

Technical Advantages：

• • High automatically, reducing labour intensity greatly;
  • Dual host, bringing fast positioning and high efficiency;
  • Matieral elevating mechanism, a smart feeding method;
  • Counting by encoder with high bending accuracy；
  • Accurate gear positioning system for accurate bending length;
  • Advanced control system, and humanized operation way.